A new way to discreetly increase natural daylight in dark rooms and passages is being introduced by Glidevale.
The company has developed an 'inplane' version suitable for its 250, 350 and 530mm diameter systems. Fitting virtually flush to the roof, Sunscoop In-Line is therefore unobtrusive once installed, providing a discreet and aesthetically pleasing way of naturally lighting the building. The roof-mounted glazing 'catches' natural light, reflecting it in down silvered tubes ducted through the roofspace and ceilings, into the room below.
Lenze maintains it has taken cost and complexity from vector motor control with the added advantage of IP65 protection in its SMV frequency convertor. The enclosure allows outdoor use in the damp with protection against low pressure jets.
As poor lighting control can spoil the whole viewing experience, Hamilton Litestat has developed its Digital Mercury System lighting control system. The miniaturization of circuit boards has made it possible for the company to create custom installations. These integrated controllers, which are extremely compact can incorporate sound and lighting controls, heating and ventilation systems.
A technically advanced roof dome is claimed to make SolaLighting's Solatube Daylighting System 'the brightest prospect yet'.
Its new lens and reflector features are said to capture up to double the amount of daylight than any other system. Maintenance-free, the system has no running costs.
The new Crompton Lighting Tufflite range of linear fluorescent luminaires from Cooper Lighting and Security has been designed for use in applications where they may be subjected to wet or dusty conditions or even corrosive chemicals.
There are two models in the range - Tufflite TFW and Tufflite TFC - and both feature a robust construction with a deep poured gasket seal for IP65 protection against dust and water ingress.
The TFW is a general purpose, weatherproof luminaire with a flame retardant polycarbonate body, prismatic diffuser and clips.
The vandal-resistant design makes it suitable for public areas such as swimming pools and car parks, as well as industrial applications.
The polycarbonate-free TFC is said to be ideal for use where resistance to corrosive chemicals is required. Its body is made from glass-reinforced polyester, the diffuser from stippled acrylic, and stainless-steel clips are supplied.
Both luminaires are available in eight different sizes to accommodate a variety of T8 or T5 lamps in either single or twin configurations, and the range also includes integral emergency versions.
The new Crompton Lighting Tufflite range of linear fluorescent luminaires from Cooper Lighting and Security has been designed for use in applications where they may be subjected to wet or dusty conditions or even corrosive chemicals.
There are two models in the range - Tufflite TFW and Tufflite TFC - and both feature a robust construction with a deep poured gasket seal for IP65 protection against dust and water ingress.
The TFW is a general purpose, weatherproof luminaire with a flame retardant polycarbonate body, prismatic diffuser and clips.
The vandal-resistant design makes it suitable for public areas such as swimming pools and car parks, as well as industrial applications.
The polycarbonate-free TFC is said to be ideal for use where resistance to corrosive chemicals is required. Its body is made from glass-reinforced polyester, the diffuser from stippled acrylic, and stainless-steel clips are supplied.
Both luminaires are available in eight different sizes to accommodate a variety of T8 or T5 lamps in either single or twin configurations, and the range also includes integral emergency versions.
The Hartland electrical accessory range from Hamilton Lifestat has been used in the south coast's newest marina development at The Cape in Newhaven, East Sussex.
The electrical accessories, which were supplied in a brush aluminium finish were selected for their ability to satisfy the developers electrical and data requirements and complement the contemporary design.
A range of ATEX compatible cable glands in various sizes and suitable for use in hazardous area has been launched by Kopex International.
Made from Polyamide 6, which is self-extinguishing and flame retardant, the glands consist of a body, sealing ring and capnut.
A range of moulded thermoplastics wiring accessories to sit alongside its existing MEM ranges has been introduced by Eaton.
Called EMA - the Eaton Moulded Accessory range - it features plates moulded from polycarbonate which is claimed to make them extremely robust and resistant to cracking.
This is matched by a stylish, modern appearance that the Birmingham-based company says will grace a wide range of residential and commercial interiors.
In spite of being able to take lamps up to 70W of high output and having integral control gear, Thorn's E/Fact Slim is just 115mm deep and 85mm slimmer than the company's previous recessed outdoor luminaire offering.
This enables it to be used for locations where mounting space is at a premium, for instance under a canopy, lighting a building facade or pedestrian areas,
Two body shapes - square and circular - are available in three diameter sizes: 210mm, 280mm and 370mm. Other plus points in favour of E/Fact Slim - a selection of five lamp types, including LEDs, the option of ceiling versions and choice of frosted or part-frosted front glasses.